Warrior 57059 “ROCK CRAWLER” FRONT BUMPER (1976 – 1986 Jee Manual do Utilizador descarregar pdf

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

“ROCK CRAWLER” FRONT BUMPER

INSTALLATION INSTRUCTIONS

WAR 570 - 571 – 57050 – 57051

578 – 579 – 57058 - 57059

Bumpers are designed to fit over factory front frame horns and use existing

factory mounting holes.

1. Remove your existing bumper from your vehicle. Save all bolts as you will need

them later for installing your new bumper.

2. If you have lights mounted on your old bumper and wish to remount them on

your new bumper, mark bumper for drilling and mount them at this time.

3. Install new bumper with factory hardware removed in step one. There are two

square washers provided. They should be placed on the top of the frame and

under the factory tow hook for proper spacing.

4. Reinstall license plate on the passenger side of the bumper using factory bolts.

5. After initial test drive, check all bolts for tightness.

Enjoy your new bumper!

Check out our web site at www.warriorproducts.com for more great accessories.

If you need further assistance installing your product, please contact us by email at

[email protected] or call us at (888) 220-6861.

THANK YOU FOR PURCHASING WARRIOR PRODUCTS

1 2

Protecting Your Adventure Lifestyle========================================================================================QUALITY •

Protecting Your Adventure Lifestyle========================================================================================QUALITY •

Sem comentários

Warrior 57059 “ROCK CRAWLER” FRONT BUMPER (1976 – 1986 Jee Manual do Utilizador