Warrior 630 TORQUE BARS (1960 – 1984 Toyota FJ40 Landcruis Manual do Utilizador descarregar pdf

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

TORQUE BARS

INSTALLATION INSTRUCTIONS

WAR630

1.) Raise rear of vehicle and securely place on jack stands. Remove rear tires for ease

of installation.

2.) Install bushings and sleeves into torque bars, install mounting brackets onto torque

bars using supplied hardware.

3.) Hold torque bars and brackets up to frame and axle as illustrated in picture to get an

idea of mounting location, mark as needed.

4.) Axle bracket is to be welded to axle housing, while the frame bracket can be welded

or bolted in place. Install frame bracket first. (If welding bracket be sure to remove

torque bars first, so the heat won’t melt bushings.) Once cool reinstall torque barzs

and axle bracket. Hold axle bracket in place on axle housing. Give bracket _” –1”

of clearance to u-bolt. Remove torque bars and weld bracket.

5.) Once everything is cool, touch up paint and reinstall torque bars.

6.) Reinstall tires and place vehicle on ground. Now a 7/16” hole can be drilled through

bars for the locking pin. Drill hole 1” from open end of the larger bar, all the way

through both bars.

7.) Install pins.

If you need further assistance installing your product, please contact us by email at

[email protected] or call us at (888) 220-6861.

THANK YOU FOR PURCHASING WARRIOR PRODUCTS

Protecting Your Adventure Lifestyle========================================================================================QUALITY •

Sem comentários

Warrior 630 TORQUE BARS (1960 – 1984 Toyota FJ40 Landcruis Manual do Utilizador